Rebar Bending and Cutting with Fascut FS-600

This is fast food industries FS 600 combination rebar cutter and bender  machine it runs off the standard 110  volt outlet or generator and is perfect  for all rebar projects at the workplace  or on the job site the FS 600 makes cuts and bends with ease and can go directly from one to the other without changing  any settings or parts with its powerful  electric hydraulics.

It makes each cut and Bend both fast and efficient this  machine is capable of cutting any rebar  up to a grade 60 3/4 inch bar and using the optional stop are attachments seen  in use here will make repeated and accurate cuts of the same length of up  to 4 feet long the FS 600 can be  operated by either a standard  push-button or with an optional foot  pedal to keep both hands-free.

The cutting style for the FS 600 is with an  open jaw shearing method and it's  replaceable blades can be rotated eight  times for longer life if the power this  machine has even a max capacity cut  takes only two seconds to complete baskets FS 600 also has the power to bend any rebar up to a grade sixty three-quarter inch bar and depending on the angle set takes only two to four seconds per Bend.

The stop bar attachment can be of great use when fabricating  more complex rebar forms such as a stirrup which is shown being made here  with a three-point bending system of the FS 600 these bends can be made fast and  efficiently reducing wasted time between  multiple buttons the two outside bending rollers and central bending die on the FS 600 can be easily adjusted to make bends with either smaller or larger radius to suit your manufacturing needs...

Watch This Video To Know More About "Rebar Bending and Cutting with Fascut FS-600"